AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable AC Installation Across Santa Monica
If your Santa Monica home is ready for a new cooling system, we install heating and cooling equipment built for coastal conditions. We know Santa Monica’s housing well: the compact lots on the north side, the Spanish Revival bungalows that never had ducts, and the low-rise apartment buildings where a condenser has to fit into a tight side yard. Our technicians have up to 8 years of experience and are certified on nine major brands, so we work with the equipment that suits your home rather than whatever’s easiest to sell. Call (844) 962-2046 and we’ll set up a free estimate.
Why Santa Monica Homeowners Call AC Repair Burbank for AC Installation
We’re an HVAC-only company. Heating and cooling is the trade we practice, and that focus shows up in the details of an install: a proper load calculation, a condenser placed where it won’t cook itself, and a refrigerant charge weighed in to the manufacturer’s number.
Santa Monica homeowners reach out because they want someone who understands the local building stock. Much of our work is planned installation rather than emergency repair, and we treat it that way: written fixed pricing, a set install date, and the paperwork for permits and heat-pump incentives handled with you.
We schedule installs across the city, from the blocks near the beach to the streets up toward Montana Avenue. Response to Santa Monica is quick, and if your existing system fails before the new one goes in, our repair side can carry you until install day. We work on the system you already have, without pushing a single brand.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
HVAC Installation in Santa Monica
HVAC Installation in Santa Monica usually means more than swapping a box outside. The dense housing here forces decisions: where the condenser sits relative to a neighbor’s window, whether the attic or a closet can carry ductwork, and how to keep the electrical panel happy with a modern air handler. A typical installation runs $4,130 – $8,850, depending on system type, size and the labor the layout demands. The written estimate you get from us is the final word on price.
Rooftop and Closet Systems in Dense Housing
Many Santa Monica condos and low-rise apartments place equipment on roofs or in tight mechanical closets. That restricts access and clearance, so we plan the rigging, pad and service space before the truck is booked. A condenser crammed against a wall will recirculate its own hot air and run badly from day one.
Why Load Calculations Matter Here
Coastal summers are mild, which makes oversized equipment an easy mistake. A room-by-room load calculation sizes the system to the actual house, so it cycles long enough to pull humidity out instead of short-cycling and leaving the interior damp. Your Trane or Lennox air handler should match the tonnage, not exceed it.
Heat Pump Installation in Santa Monica
Heat Pump Installation in Santa Monica is growing fast, and not by accident. The city leans hard on green-building rules and heat-pump incentives, and the damp coastal winters suit a system that heats and cools efficiently in moderate temperatures. Most heat pump projects here fall in the same $4,130 – $8,850 range as a conventional AC install, with ductwork and electrical work as the main variables. We’ll quote a fixed price in writing before any work starts.
Replacing Gas Furnaces in Older Homes
Plenty of pre-war bungalows and 1960s apartment blocks still run gas furnaces. Converting to a heat pump means assessing the panel, the existing ducts and the outdoor space for a condenser. We walk you through the permit side with the city’s building department so the retrofit is documented and clean.
Mini Splits Where Ducts Won’t Fit
Older Santa Monica homes often have no ductwork at all, and running new ducts is impractical or impossible. A ductless mini split lets those homes get real cooling and heating without tearing into walls. We size the indoor heads to the rooms you actually use.
Trusted Brands We Service in Santa Monica
We’re factory-familiar with nine leading HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant and American Standard. That means we’re not learning on your equipment. If your home already has a Rheem or a Goodman system and you’re replacing it, we know the lineup and the parts chain, so turnaround on the install is quicker. We don’t stock parts locally and we don’t push one manufacturer. We spec the unit that fits your house, your ducts and your budget, then install it to the maker’s specs.
See the difference
Before
After
Before
After
Before
AfterCommon AC Installation Problems We See in Santa Monica Homes
- Salt corrosion on condensers west of Lincoln Blvd. Marine-layer moisture carries salt into outdoor coils, and units near the beach often show fin rust and refrigerant leaks years before equipment east of the 405. We spec factory-coated coils or shift the condenser to a sheltered side yard.
- Undersized ductwork in older bungalows. Ducts that are too small for the layout create high static pressure, strain the blower motor and leave back rooms warm. A load calculation and a duct plan solve it, or a ductless mini split sidesteps the problem entirely.
- Short-cycling systems leaving humidity behind. Oversized equipment cools fast and shuts off before it dehumidifies, and in a damp coastal climate that invites mold inside the evaporator coil and cabinet. Correct sizing fixes it.
- Apartment buildings with no condenser clearance. Shared or undersized systems in older low-rises often have nowhere sensible for a new condenser, so hot air recirculates. We find a workable location or recommend a ductless approach.
Pricing for AC Installation in Santa Monica, CA
Typical AC installation in Santa Monica runs $4,130 – $8,850, and heat pump installation falls in the same range. What moves the number is the system type, the tonnage the load calculation calls for, whether ducts need rerouting, and the access challenges of a rooftop or closet install. A job that needs a coated coil for salt protection or a condenser relocated to a side yard will sit toward the higher end. We give a free estimate and a fixed written price before work begins, so there are no surprises once the equipment is ordered.
| Service | Typical Estimated Range |
|---|---|
| AC Installation | $4,130 – $8,850 |
| Heat Pump Installation | $4,130 – $8,850 |
These are estimates. The written estimate sets the final price.
We Also Serve Cities Near Santa Monica
We install and repair systems across the surrounding Westside, including Marina del Rey, Culver City, Beverly Hills and View Park-Windsor Hills. If you’re just outside the city line, we can still help. Learn more about our AC installation work, or read about how we serve Santa Monica and nearby neighborhoods.
Serving Santa Monica, CA – Our Local Coverage Area
We serve Santa Monica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About AC Installation in Santa Monica
Yes. Santa Monica requires permits for HVAC installations, and heat-pump retrofits in particular are reviewed against the city’s green-building rules. We help you navigate the building department paperwork as part of the job. Call (844) 962-2046 for a free estimate.
The marine layer and salt air push us toward equipment with coated condenser coils or a sheltered placement, especially west of Lincoln Blvd. It also means correct sizing matters more than raw tonnage, since a damp climate rewards a system that runs long enough to dehumidify. Call (844) 962-2046 to talk through options for your home.
Usually yes. Ductless mini splits are one of the best fits for older bungalows without ductwork, since they avoid running new ducts through original walls. We size the indoor heads to the rooms you use most. Call (844) 962-2046 for a free estimate.
Size comes from a room-by-room load calculation, not a guess based on square footage. In apartment buildings with shared or undersized systems, the right answer is often a small unit placed where it has proper clearance, or a mini split. Call (844) 962-2046 and we’ll work it out.
Spec a factory-coated condenser coil and keep the unit out of direct salt-laden wind where possible, such as a sheltered side yard. Regular rinsing of the outdoor coil also helps prolong its life. Call (844) 962-2046 to plan a corrosion-resistant install.
Ready to replace or install your cooling system? Call us at (844) 962-2046 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’ll bring a written fixed price, a set install date, and help with the permit and heat-pump paperwork.
Written by the team at AC Repair Burbank.