AC Installation in Burbank, CA | AC Repair Burbank

AC Installation in Burbank - Load-Calculated, Priced in Writing

We size the system with a proper load calculation rather than copying what was there, then give a written fixed price with the install date set. Rebate and financing paperwork handled for you.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

AC repairAC repair
Furnace & heatingFurnace & heating
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

We have financing partners for your new heating and cooling system

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate
Questions about your HVAC?Free estimate, price agreed before work starts
Call (844) 962-2046

Trusted AC Installation for Burbank Homeowners

A failed air conditioner in the middle of a Burbank summer turns a house into an oven fast. When repairs stop making financial sense, AC installation is the fix, and it’s the work our team does every day. Our technicians have up to 8 years of experience and are certified to work on 9 major HVAC brands, so your Trane or Lennox system gets handled by someone who knows that specific equipment rather than guessing. We give you a written, fixed price before anything is ordered, and we set a firm install date instead of leaving you waiting. Installation is scheduled work, but if your old unit just quit, call (844) 962-2046 and we’ll get an assessment on the calendar quickly. Heating and cooling is the only trade we handle, and it shows in the final result.

Call (844) 962-2046

Furnace Installation

Furnace Installation is the replacement or first-time fitting of the heating unit that warms your home, and it makes sense when your current furnace is beyond economical repair or no longer matches the size of your house. In Burbank’s mild climate, a furnace often lasts through its full service life simply because it runs less, so a failure usually catches people off guard. We assess the existing unit, measure the home’s heating load, and recommend a correctly sized replacement rather than selling you the biggest box available. We work on equipment from Rheem, Goodman, and other major makes, so you don’t have to switch brands just to get service. A new furnace installation typically runs within our $3,500-$7,500 range for air conditioning and heating equipment, and the written estimate sets the final price. Whether it’s a furnace or an AC, we’ll tell you which option actually makes sense.

Sizing and Load Calculation

An oversized furnace short-cycles, which wears the components and drives up your gas bill. We run a room-by-room load calculation before recommending a model, factoring in insulation, window orientation, and the actual square footage. That step is what separates a good install from one you regret in five years.

Where the Furnace Actually Goes

Most Burbank homes put the furnace in a closet, attic, or garage rather than a basement, which changes what we can fit and how the venting routes. We check clearances and return-air space before the unit is ordered. If your old furnace barely squeezed into the cabinet, the new one needs to fit properly.

Explore

Styles & brands we work with

  • AC repair
  • Furnace & heating
  • Heat pumps
  • Ductless mini splits
  • Carrier
  • Trane
  • Goodman

HVAC Installation

HVAC Installation is the complete fitting of a matched heating and cooling system, and it’s the right call when both halves of your equipment are aging out at the same time. Doing them together avoids mismatched components that fight each other and keeps the warranty and efficiency ratings honest. We start with a load calculation, then propose equipment sized for your home and the way your household actually uses it. Because we handle heating and cooling only, we’re not splitting attention across plumbing or electrical trades, so every technician’s training stays on this equipment. Expect AC and heating installation together to land in our $3,500-$7,500 range, with the written estimate setting the final price. We’ll tell you if replacing both makes sense or if one half still has good years left.

Matched System Pairing

An outdoor condenser and an indoor coil that weren’t designed together lose efficiency and can void manufacturer warranties. We pair components from the same line and check the matchup against the manufacturer’s specifications. Getting that right on paper prevents a lot of headaches later.

What Happens on Install Day

We set the equipment, make the connections, pull the permit where the city requires it, and run a full start-up check. Refrigerant charge gets verified by weight and by pressure, not by feel. Then we walk you through the thermostat and the new filters before we leave.

Want to talk it through?Free estimate, price agreed before work starts
Call (844) 962-2046

Heat Pump Installation

Heat Pump Installation is fitting a single system that both cools and heats, and it suits Burbank well because winters here are mild enough that a heat pump carries the heating load without strain. When your old AC is done and you want to stop relying on a separate gas furnace, a heat pump consolidates the job into one unit. We confirm the electrical service can support the new equipment and check whether any existing ductwork needs attention before we quote. Modern heat pumps are not the noisy, underpowered units people remember; Trane and Daikin both make equipment we’re familiar with. Budget-wise, it falls inside our $3,500-$7,500 installation range, with the written estimate fixing the final number. If you’re weighing a heat pump against a straight AC replacement, we’ll lay out both honestly.

Keeping the Existing Ductwork

If your ducts are in decent shape, a heat pump can reuse them, which keeps the job simpler. We inspect for leaks and crushed runs first, because a heat pump moves air at a specific pressure and weak ducts waste the efficiency you paid for.

Defrost and Cold-Weather Controls

Heat pumps cycle through a defrost mode to clear frost from the outdoor coil, and the controls need to be set for it. Burbank barely needs cold-weather lockout settings, but the defrost cycle still matters. We set and test it before sign-off.

Ductless Mini Split Installation

Ductless Mini Split Installation is fitting one or more wall-mounted indoor units connected to an outdoor compressor, with no ductwork involved. It’s the answer for rooms that never got comfortable, additions, garages converted to living space, and older Burbank houses with no ducts at all. Each zone gets its own control, which means you’re not heating and cooling empty rooms. We mount the indoor unit, run the line set, and check the condensate drain routes properly. Goodman and Daikin both build solid mini split equipment, and we’re familiar with how each line handles the controls and refrigerant. Pricing lands in our $3,500-$7,500 range, final price set by the written estimate. Call (844) 962-2046 if you want to talk through how many zones make sense.

Getting the Mounting Right

An indoor unit needs a sturdy backing and a slope that lets condensate drain cleanly, or you’ll get water on the wall. We locate the unit where the air reaches the whole room rather than wherever the wall is easiest. Small placement choices matter more than they seem.

Line Sets and Refrigerant Length

The distance between indoor and outdoor units affects refrigerant charge and efficiency. We keep runs short where the layout allows and adjust the charge for the actual length. Every mini split install gets pressure-tested before we call it done.

AC Replacement

AC Replacement is swapping out a failed or failing air conditioner for a new unit, and it’s the choice when repair costs approach what a new system makes sense to spend. If your system needs refrigerant it can no longer get, has a failed compressor, or is just limping through every summer, replacement stops the bleeding. We assess the old equipment, check the ductwork and electrical, and size the new unit to your home. Because we also handle repair, we won’t push replacement if a repair genuinely solves the problem; whether it needs a repair or a full replacement, we’ll tell you which one actually makes sense. Replacement typically falls in our $3,500-$7,500 range, with the written estimate setting the final price. We can work with your insurer where a claim applies.

Need a price for your HVAC?Free estimate, price agreed before work starts
Call (844) 962-2046

The Right Way to Retire Old Equipment

Refrigerant recovery and safe removal of the old unit are part of the job, not an afterthought. We handle the pump-down properly so nothing vents into your yard or the air. Old equipment gets hauled away rather than left on your driveway.

Matching the New Unit to What Exists

A new condenser has to work with the indoor coil, the line set, and the electrical supply you already have. Sometimes that means minor upgrades; often it means none. We inspect all three before quoting so there are no surprises on install day.

Central Air Conditioning Installation

Central Air Conditioning Installation is fitting or replacing a whole-house system that cools through ductwork, and it fits homes with existing ducts in reasonable condition. It’s the right route when you want consistent comfort room to room rather than zoned mini splits. We measure the home, calculate the cooling load, and select equipment sized for it; oversized units cool too fast and leave humidity behind. Ducts get inspected and sealed where needed. We work on Carrier, Bryant, American Standard, York, and other brands, so the new system can match what’s already in your home. Expect the job to land in our $3,500-$7,500 range, with the written estimate setting the final price. Call (844) 962-2046 to start with a free assessment.

Duct Condition Before the Unit

The best condenser is only as good as the ducts moving its air. We check for leaks, disconnected joints, and crushed runs before recommending equipment. Fixing a duct problem first often changes which system is the right buy.

Permits and Final Inspection

Most cities in Los Angeles County require a permit for a central AC changeout, so we check the requirements with Burbank’s building department before the work starts. Pulling the permit keeps the install compliant and avoids issues when you sell the house. The final inspection is part of the job, not extra.

The Brands We Service

We’re factory-familiar with nine leading HVAC manufacturers, which means our technicians aren’t learning on your equipment. AC Repair Burbank technicians know Trane systems well and understand where those units typically wear as they age. Lennox equipment gets handled with the same fluency. Goodman is a popular choice for value, and we know its component layout. Rheem rounds out the major lines we cover. That breadth matters when your system is already installed and you’re not looking to switch brands.

Brand familiarity is about diagnosis, not dealership. We’re not tied to a single manufacturer and don’t push a preferred label. Whether you have Carrier, Bryant, American Standard, York, or Daikin equipment, we can help. That also applies across the rest of our service area, including Beverly Hills and San Fernando, where AC installation and AC installation are both handled by our team. For straightforward AC installation, you’ll find more detail on our AC installation page.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your HVAC?Free estimate, price agreed before work starts
Call (844) 962-2046

Signs You Need a Pro Right Now

  • Warm air from the vents. If the system runs but blows air that never gets cold, the refrigerant charge or compressor is likely the issue. That’s a trained-professional job; refrigerant handling is regulated and dangerous to attempt without the right equipment.
  • Loud banging or grinding on startup. Odd noises usually point to a failing motor, worn bearings, or a loose part inside the cabinet. Running it longer can turn a smaller repair into a full replacement.
  • Water pooling around the indoor unit. A blocked condensate drain or a frozen coil is the usual cause. Standing water near electrical components is a genuine safety concern, so shut the system down and get it looked at.
  • Short cycling on and off. A system that starts and stops every few minutes is often oversized, low on refrigerant, or fighting a thermostat problem. It wears out components fast and never dehumidifies the house properly.
  • Refrigerant leaks or a system that needs topping off. A sealed system shouldn’t lose charge. A recurring low-charge reading means there’s a leak somewhere that needs locating, not just recharging.

If any of these show up, call (844) 962-2046. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Our Process, Step by Step

  1. 1
    Phone assessment. We ask about the equipment, the age, and the symptoms so we know what we’re walking into. That saves time on the visit and lets us bring the right tools.
  2. 2
    In-home evaluation. A technician inspects the existing system, the ducts, the electrical supply, and the space. For installations, we measure the home and run a load calculation rather than eyeballing square footage.
  3. 3
    Written options. You get a fixed price in writing, laid out in plain terms with the equipment, the labor, and the timeline. No pressure to decide on the spot; take the quote and compare it if you want.
  4. 4
    Scheduled install. Parts get ordered, the permit gets pulled where required, and we set a firm date. On the day, we protect your floors, work clean, and test every connection before leaving.
  5. 5
    Walkthrough and sign-off. We show you the new system, explain the thermostat, and note the filter size so future maintenance is simple. You get the paperwork for any manufacturer warranty.

How Much Does AC Installation Cost in Burbank?

AC installation in Burbank typically runs $3,500-$7,500 for a full system, with the final price set by the written estimate. A straightforward replacement of a like-for-like unit sits near the lower end. A job that needs a new line set, electrical work, or a different indoor coil trends toward the higher end. Here’s how the ranges break down:

Service Typical Estimated Range
AC Installation $3,500-$7,500
AC Repair $150-$650
Furnace Repair $150-$700
Tune-Up $80-$200

What drives the number: the size of the system your home needs, whether the ductwork is sound, how far the line set has to run, and whether the electrical panel needs upgrading. Older Burbank houses sometimes have panel capacity that limits equipment choice, which is worth knowing before you fall in love with a particular model.

How to avoid overpaying: get a written quote, ask what’s included for labor and disposal, and confirm the load calculation was actually done. Cheap installs usually skip sizing and shortchange the start-up. If a contractor won’t put the price in writing, walk away.

Our free estimate includes an on-site assessment, a sizing check, and a fixed written price with no obligation. Call (844) 962-2046 to schedule one; it costs nothing and there’s no pressure to book the work.

Want to talk it through?Free estimate, price agreed before work starts
Call (844) 962-2046

Our Service Area Near Burbank

We handle work across Burbank and the surrounding neighborhoods, including Beverly Hills, San Fernando, Culver City, View Park-Windsor Hills, Santa Monica, Florence-Graham, Marina del Rey, Westmont, and Lennox. Travel time varies by distance and traffic, but we schedule installations with a clear window so you’re not waiting around all day. For urgent repairs nearby, dispatch is fast. If you’re outside this list, call and we’ll confirm coverage.

Serving Burbank, CA – Our Local Coverage Area

We serve Burbank and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About AC Installation in Burbank

Schedule Your AC Installation Service in Burbank Today

Ready for a system that keeps up with a Burbank summer? Call (844) 962-2046 for a free, no-obligation estimate. We’ll assess your home, size the equipment properly, and hand you a fixed written price before any work begins. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Whether it needs a repair or a full replacement, we’ll tell you which one makes sense.

Written by the team at AC Repair Burbank.

Why Burbank Chooses AC Repair Burbank

We set the standard for ac installation in Burbank.

30-60 Min Response

Fast dispatch across Burbank, 7am-7pm. Same-day service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Burbank

Getting your ac installation handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your ac installation needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Burbank - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local ac installation pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Burbank Customers Say

Trusted by homeowners across Burbank and surrounding areas.

★★★★★

"Got a text with the technician's name and photo before he arrived. Small thing, but as a woman home alone during the day I actually really appreciated it."

Alma Martinez
★★★★★

"Contactor was pitted and chattering. Cheap part, quick fix, and he showed me the burn on the old one so I could see for myself."

Javier Morales
★★★★★

"New system install, two days, and they were careful with the floors and the attic access the entire time. Registered the warranty for me and emailed the paperwork."

Daniel Lawson

Ready for AC Installation in Burbank?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Burbank.

(844) 962-2046

Request a Free Estimate in Burbank

Tell us about your ac installation needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - We Answer 24/7