AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted Furnace Repair for Burbank Homeowners
A furnace that won’t light, blows cold air, or cycles on and off without warming the house needs a real diagnosis, not another reset. We handle furnace repair across Burbank, from the hillside homes above Glenoaks to the ranchos and bungalows near Magnolia Park, and we work on the system you already have. Our technicians have up to 8 years of experience, and they’re factory-familiar with nine of the leading brands, so they aren’t guessing at your Trane or Lennox. Fast diagnosis, honest options, and a written estimate before any work starts. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday, so a cold house doesn’t wait long. Call (844) 962-2046.
Furnace Maintenance
Furnace Maintenance is the scheduled check that catches worn parts and dirty burners before they turn into a no-heat call in January. In Burbank the heating season is short and mild, which is exactly why furnaces sit idle for months and come back to life with dust-clogged filters, a pilot that’s slow to catch, or a blower bearing that’s dried out. We look at the whole system, not just the filter: burners, flame sensor, heat exchanger, blower, venting, and thermostat behavior. You need it once a year, ideally before the first cold snap, and a tune-up typically runs $80-$200 depending on the system. The written estimate sets the final price.
What a Maintenance Visit Covers
We check gas pressure, clean the burners and flame sensor, inspect the heat exchanger for cracks, and test the blower and limit switches. Filters get changed and the thermostat gets checked against actual room temperature. You get a written report of what we found, and technicians aren’t paid on what they sell, so the list reflects the system, not a quota.
Why Annual Checks Matter in a Mild Climate
Long idle stretches let dust settle on ignition components and let rubber and bearings dry out. A furnace that runs fine in a cold-climate home gets fewer hours here, which sounds easy but means problems hide until you need heat. A yearly visit surfaces them while they’re cheap.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Heat Pump Repair
Heat Pump Repair covers the systems that heat and cool from one unit, and in Burbank that means a lot of homes running a heat pump as their only HVAC equipment. When it stops heating, the problem is often a reversing valve, a defrost board, or a refrigerant charge that’s drifted, not a dead compressor. We test the whole cycle: outdoor unit, indoor coil, refrigerant pressures, and the control board, then tell you what’s wrong in plain terms. Typical heat pump repairs run $150-$700 depending on the part and labor, and the written estimate sets the final price.
Heating and Cooling From One System
A heat pump in heating mode reverses the refrigeration cycle, so the same parts that cool your home in summer warm it in winter. That shared hardware means a repair decision affects both seasons, and we factor that in. If a part fails in heating mode, we check whether cooling is compromised too.
Defrost and Reversing Valve Problems
When the outdoor unit ices up or the system blows cold in heat mode, the defrost cycle or reversing valve is usually the culprit. Both are testable with gauges and a meter, not guesswork. We diagnose before we quote.
Heating Repair
Heating Repair is the broad category that covers any system failing to warm your home, whether it’s a gas furnace, a heat pump, or a packaged unit. The calls we get in Burbank usually fall into a few patterns: no heat at all, weak heat, strange smells, or a blower that runs but never warms the air. We start with a full diagnostic and then walk you through the options, repair or replace, with the actual cost of each. Most heating repairs land between $150-$700, and the written estimate sets the final price.
No Heat, Weak Heat, or Short Cycling
Each symptom points to a different part of the system. No heat is often ignition or gas supply; weak heat is usually airflow or a failing blower; short cycling often traces to a limit switch or a thermostat reading the wrong room. Matching the symptom to the cause saves you from replacing parts that are fine.
When Repair Makes More Sense Than Replacement
If the system is otherwise sound and the repair is a single component, repair usually wins. If the heat exchanger is cracked or multiple major parts are failing at once, replacement is the safer call. We tell you which one actually makes sense.
Boiler Repair
Boiler Repair handles the hydronic systems that heat water and circulate it through radiators or baseboard, and it’s a different skill set from forced-air work. In Burbank’s older homes you’ll still find boilers doing the heating, and when they act up the symptoms are distinct: cold radiators, banging pipes, a pressure gauge that won’t hold, or a boiler that fires but never gets hot. We diagnose the circulator, expansion tank, zone valves, and burner, then give you a written estimate. Typical boiler repairs run $150-$700 depending on the component, and the written estimate sets the final price.
Radiators That Stay Cold
A cold radiator usually means trapped air, a stuck zone valve, or a circulator that’s not moving water. We check each zone separately so the fix targets the right one. Banging or gurgling points to air or pressure problems worth catching early.
Pressure and Expansion Tank Checks
Boilers need stable pressure to run safely and efficiently. A gauge that climbs or drops repeatedly often means the expansion tank has lost its charge or the fill valve is failing. Both are straightforward to test and repair.
Gas Furnace Repair
Gas Furnace Repair is the work on the fuel-burning side of your heating system, and it’s the category where safety matters most. If you smell gas, hear a boom on ignition, or see a yellow lazy flame instead of a crisp blue one, stop and call a professional; don’t try to service the burner or gas valve yourself. We check the gas valve, igniter, flame sensor, burners, and heat exchanger, and we test for proper combustion and venting. Most gas furnace repairs fall in the $150-$700 range, and the written estimate sets the final price. Call (844) 962-2046 if you’re not sure whether it’s safe to run.
Ignition and Flame Sensor Faults
A furnace that clicks but won’t light is usually an igniter or flame sensor issue. These parts are small and inexpensive to test, and a technician can confirm which one is failing with a meter rather than replacing both. It’s a common no-heat call and often a quick fix.
Heat Exchanger and Venting Safety
A cracked heat exchanger can let combustion gases into your home’s air, which is why we inspect it on every gas call. Venting problems show up as soot, condensation, or a furnace that shuts off on a safety switch. Both are worth stopping for.
Furnace Tune Up
Furnace Tune Up is a focused service visit that cleans and checks your furnace so it runs efficiently through the heating season. It’s the right call if the system has gone a year or more without attention, if your energy bills crept up, or if you want a baseline before winter. We clean the burners, check ignition, inspect the heat exchanger, test the blower and safety switches, and confirm airflow. A tune-up typically runs $80-$200 depending on system type, and the written estimate sets the final price. You get a written report of what we found, and technicians aren’t paid on what they sell.
Efficiency and Airflow Checks
Dirty burners and a restricted filter make the furnace work harder for less heat. We measure airflow and check the temperature rise against spec, then correct what’s off. Clean combustion and good airflow are the two things that most affect how efficiently a furnace runs.
What the Written Report Tells You
The report lists every component we checked and its condition, plus anything that’s wearing and worth watching. It’s a record you can compare year to year. No upsell, just what we saw.
Emergency Furnace Repair
Emergency Furnace Repair is for the failures you can’t sit on: no heat on a cold night, a furnace that smells like gas or burning, or a system that keeps tripping its safety switch. In Burbank a sudden cold snap can catch a system that ran fine all fall, and a house without heat is uncomfortable fast. We treat these calls with priority, diagnose on arrival, and either fix it or tell you clearly if it needs replacement. Emergency repairs still fall within the same $150-$700 typical range; the written estimate sets the final price, and we don’t charge a premium for urgent calls. Call (844) 962-2046, we answer 24/7.
Same-Day Repair
When you call with a no-heat situation, we work to get a technician to you the same day. Fast dispatch runs from 7am to 7pm, Sunday through Friday. The goal is heat back on, not a sales visit.
What Happens When You Call
We answer 24/7, take your details and the symptoms, and book the next available dispatch. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Bring us the model and what it’s doing and we’ll come prepared.
Brands We Service
We work on the system you already have, and that includes the major brands most Burbank homes are running. Trane equipment is built for long service, and when it fails it’s often the igniter or a control board, which we know how to test directly. Lennox furnaces show up with their own control sequences and part layouts, so familiarity saves diagnostic time. Goodman units are common in newer installations and straightforward once you know the ignition path. Rheem systems are equally familiar, from gas valves to blower assemblies.
Our technicians are factory-familiar with nine leading brands and get to know where each one tends to wear out, so a repair call isn’t the first time we’ve opened that model. We service Carrier, Bryant, York, Daikin, and American Standard on the same basis. Whether you have Trane, Lennox, Goodman, Rheem, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
Some furnace problems can wait for a scheduled visit. These are the ones where calling sooner protects your home and your safety.
- You smell gas. A rotten-egg smell near the furnace means a possible gas leak; leave the area, ventilate if you can, and call from a safe spot. This is a professional-only situation and should never be handled yourself.
- The flame is yellow or lazy. A healthy gas flame is crisp and blue. A yellow, floating, or sooty flame points to incomplete combustion or a venting issue, which is worth stopping for.
- The furnace keeps shutting off. Short cycling on a safety limit switch means the system is protecting itself from a real fault, often overheating or blocked venting. Ignoring it can turn a small repair into a bigger one.
- You hear banging, booming, or rumbling on ignition. A delayed ignition that booms is a sign the burners or gas valve need attention. It’s loud for a reason and shouldn’t be left alone.
- No heat and it’s getting cold inside. A house that can’t hold warmth is more than uncomfortable; for older residents or young children it’s a health concern. Call and we’ll get a technician moving.
Our Process, Step by Step
We keep the repair process simple and transparent so you know exactly what’s happening and why.
- 1
You call and describe the problem. We take the symptoms, the brand, and the model if you have it, then book a technician for the earliest opening. We answer 24/7; fast dispatch runs from 7am to 7pm, Sunday through Friday.
- 2
We diagnose on arrival. The technician tests the system with meters and gauges, checks ignition, airflow, and safety components, and confirms the actual fault rather than guessing at the most common part.
- 3
You get a written estimate. Before any work, you see what’s wrong, what the repair involves, and the price. The estimate is free and there’s no pressure to approve anything on the spot.
- 4
We do the repair. Once you approve, we complete the work with the right parts for your system. If the diagnosis turns up something that changes the scope, we tell you before we continue.
- 5
We confirm it works and explain what we found. The furnace is tested through a full cycle, and you get a plain-language summary of the repair plus anything worth watching going forward.
How Much Does Furnace Repair Cost in Burbank?
Furnace repair in Burbank typically runs $150-$700, depending on the failure and the parts involved. A typical igniter or flame sensor replacement runs toward the lower end of that range; a blower motor or control board replacement sits higher, and a heat exchanger or gas valve job pushes toward the top. The written estimate sets the final price, so you know the number before work starts. A standard tune-up on the maintenance side runs $80-$200.
Several things move the price. The brand and model affect part cost and availability, though our technicians are familiar with Trane, Lennox, Goodman, and Rheem equipment and know where the parts come from. The type of fault matters: ignition problems are usually quick, while airflow and heat exchanger issues take more diagnostic time. Access to the unit can add labor if it’s tucked into a tight closet or attic.
To avoid overpaying, ask for the diagnosis in plain terms and a written estimate before the repair, and don’t accept a quote that replaces parts without explaining why. What’s included in our free estimate: the full diagnostic, the confirmed fault, the recommended repair, and a price. Whether it needs a repair or a full replacement, we’ll tell you which one actually makes sense. Call (844) 962-2046 for an exact quote (free estimates).
If the system is past repair, we also handle furnace repair next door and full furnace replacement, and we’ll walk you through sizing and rebate paperwork so nothing gets missed.
Our Service Area Near Burbank
We cover Burbank and the surrounding neighborhoods and cities, including Glendale-side homes, Toluca Lake, North Hollywood, and the hills toward the Verdugo Mountains. We also reach furnace repair in San Fernando and nearby communities across the valley. Response times depend on the day and your location, but for no-heat calls we work to get a technician to you the same day. When you call, we’ll tell you the realistic arrival window and get you on the schedule. Our heating and cooling work stays focused on HVAC, so the technician at your door is trained for furnaces and AC, not plumbing or roofing.
Serving Burbank, CA – Our Local Coverage Area
We serve Burbank and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Furnace Repair in Burbank
Furnace repair is the diagnosis and fixing of a heating system that isn’t warming your home properly. It covers ignition problems, airflow faults, failed blowers, control boards, gas valves, and heat exchanger issues, along with the safety checks that go with them. We test the whole system rather than swapping parts, then give you a written estimate. If the furnace can’t be fixed safely, we’ll say so.
Most furnace repairs take one to three hours once the technician is on site, depending on the part and the system. Ignition and sensor fixes are quick; blower motors and control boards take longer, and parts sometimes need to be sourced. We’ll give you a realistic estimate when we arrive. Call (844) 962-2046 to book, estimates are free.
Typical furnace repair in Burbank runs $150-$700 depending on the fault and parts, and a tune-up runs $80-$200. Simple sensor and igniter jobs sit low in that range, while blower, gas valve, and heat exchanger work sits higher. The written estimate sets the final price before any work begins. Call (844) 962-2046 for an exact quote, estimates are free.
Yes. We’re factory-familiar with nine leading brands, including Trane, Lennox, Goodman, Rheem, Carrier, Bryant, York, Daikin, and American Standard. Our technicians have up to 8 years of experience and work on the system you already have rather than pushing a replacement brand. Whether it’s Trane or another make, we can help. Call (844) 962-2046 to schedule.
Yes, same-day service is available for no-heat calls, and we work to get a technician to you quickly. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (844) 962-2046 and we’ll find the earliest slot.
Warranty terms depend on the repair and the parts involved, and we confirm them with you in writing as part of the estimate. Manufacturer warranties on parts vary by brand and model, and we’ll note what applies to your system. We don’t promise coverage we can’t confirm. Ask about warranty when you book.
Clear access to the furnace and thermostat, and have the model number handy if you can find it. Note what the system is doing (sounds, smells, how often it shuts off) so the technician starts with your observations. Keep pets and small children clear of the work area. That’s all it takes. Call (844) 962-2046 to schedule.
Schedule Your Furnace Repair Service in Burbank Today
A cold house doesn’t need a sales pitch, it needs a diagnosis and an honest price. Call (844) 962-2046 and we’ll get a technician moving on your furnace in Burbank, with a free, no-obligation estimate before any work. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Heating and cooling, nothing else.
Written by the team at AC Repair Burbank.