AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateLennox HVAC in Florence-Graham, CA
We provide independent Lennox service across Florence-Graham, and the one thing that makes our Lennox work here different is this: we plan every condenser swap and furnace repair around the realities of unincorporated LA County housing – County permits, tight side yards, and older electrical panels that have to pass before a new system can. Florence-Graham runs on long, dry South LA basin heat, and Lennox equipment here lives or dies by summer. Call (844) 962-2046 for a free estimate.

Why Florence-Graham Residents Choose Us for Lennox Service
We’re an independent Lennox service provider, which means we work on the Lennox system you already own without steering you toward a brand we’re tied to. That independence matters in a place like Florence-Graham, where the equipment is a mix of older condensing units and newer high-efficiency installs sitting side by side on the same block.
Our technicians have up to 8 years of experience, and Lennox is one of 9 leading brands we’re factory-familiar with – Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant and American Standard. We’re not learning your system on the job.
We use OEM Lennox parts for critical components like control boards and heat exchangers so factory fit and performance hold, and proven high-quality aftermarket parts for items like capacitors and ignitors. Heating and cooling is the only trade we perform, so a technician’s training isn’t split across plumbing or roofing.
Scheduling is straightforward. We answer 24/7 and run fast dispatch from 7am to 7pm, Sunday through Friday, so a Florence-Graham homeowner with a system down in the heat gets a real appointment, not a callback promise. Reach us at (844) 962-2046.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Common Lennox HVAC Problems We Solve in Florence-Graham
- Failed capacitors in the condenser. Long, dry summer heat pushes capacitors to their thermal limits, and it’s one of the most common breakdowns we see on Lennox units like the XC13. Tight side yards with little airflow make the heat load worse. A short-cycling condenser on a hot afternoon usually traces back here.
- Leaking refrigerant from Schrader valves or coil joints. In older Lennox systems, vibration and heat in cramped installations accelerate small leaks. Restricted airflow around a condenser wedged into a narrow side yard speeds the wear. We pressure-test and find the leak rather than topping off and moving on.
- Cracked heat exchangers. Lennox furnaces such as the G61V or SLP98V can develop heat exchanger cracks when airflow is restricted, which is common in the tight attics and closets of Florence-Graham bungalows. This is a safety issue, and we treat it as one.
- Control board failures. Lennox Signature and Elite series boards can fail from voltage spikes or dust buildup in low-crawl installations. Intermittent operation – a system that runs fine, then won’t start – often points to the board.
- Undersized electrical service blocking the repair path. Many Florence-Graham bungalows still carry 100-amp panels, so a condenser replacement can hit an electrical upgrade requirement before it can be signed off. We flag that early instead of at punch-list time.
Lennox Service in Florence-Graham: What Local Conditions Mean for Your Equipment
Florence-Graham is an unincorporated patch of South LA wedged between the 110 freeway and the LA River, and that political geography shapes the work as much as the climate does. Because the area is County territory, HVAC permits run through LA County rather than a city building department. Contractors working in neighboring cities with their own building departments don’t face that step. Add the housing stock – densely packed 1920s to 1950s single-story stucco bungalows on tight lots, where the side yard often has no room for a conventional condenser pad and attics are low – and every Lennox replacement here becomes a permit-and-clearance problem before it’s an equipment problem. Many of those bungalows still have knob-and-tube wiring or undersized 100-amp panels, which means an electrical upgrade can be required before a new Lennox condenser passes inspection. We plan for that on the front end.
Lennox Models & Products We Service in Florence-Graham
We service the Lennox residential and light-commercial lineup as installed in Florence-Graham homes – split-system air conditioners, gas furnaces, and ductless mini-split systems. That includes the Elite Series (XC, XC13, XC21), the Merit Series (13ACX, ML14XC1), the Signature Series (SL28XCV, SL22KLV), and the Dave Lennox Signature Collection (SLP98V, SL280DFV).
When we open a unit, we match the part to the equipment. OEM Lennox parts for control boards and heat exchangers keep the factory fit. Capacitors and ignitors get high-quality aftermarket parts where reliability is proven. We’re an independent shop, not manufacturer-affiliated, so the recommendation is about your system, not a brand relationship. Whether it needs a repair or a full replacement, we’ll tell you which one actually makes sense.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Florence-Graham
These are typical estimated ranges for the Florence-Graham area. Your written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| AC Repair | $150 – $650 |
| Furnace Repair | $150 – $700 |
| AC Installation | $3500 – $7500 |
| Tune-Up | $80 – $200 |
What moves the number: whether the repair is a part swap or a refrigerant leak hunt, whether a heat exchanger is involved, and on installs, whether the electrical panel needs an upgrade before a County permit can clear. The AC Installation range reflects a straight swap; an upgrade pushes toward the top. A free estimate covers the diagnosis, the equipment check, and a written scope. Call (844) 962-2046 to book one.
Serving Florence-Graham, CA – Our Local Coverage Area
We serve Florence-Graham and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Lennox HVAC in Florence-Graham
No. We’re an independent Lennox service provider, not manufacturer-affiliated or authorized. That means we work on your Lennox equipment without pressure to replace it with a brand we’re tied to.
Yes for critical components. We use OEM Lennox parts for control boards and heat exchangers to hold factory fit, and high-quality aftermarket parts for capacitors and ignitors where reliability is proven. We don’t stock parts; every part is matched to your equipment.
Most repairs are a single visit once the part is in hand – a capacitor swap runs well under an hour, a refrigerant leak hunt takes longer. Installs are scheduled after the estimate clears and any County permit and electrical work is lined up. Call (844) 962-2046 and we’ll give you a realistic window.
Split-system air conditioners, gas furnaces and ductless mini-splits, including the Elite, Merit, Signature and Dave Lennox Signature Collection lines. Heating and cooling only – we don’t do plumbing or electrical work beyond what the HVAC job requires.
Typical estimates run $150 – $650 for AC repair, $150 – $700 for furnace repair, $80 – $200 for a tune-up, and $3500 – $7500 for AC installation, though the written estimate sets the final price. Call (844) 962-2046 for an exact quote – estimates are free.
A failed capacitor, low refrigerant from a leak, or a dirty condenser coil starved of airflow in a tight side yard. All three are common in Florence-Graham’s long hot summers. Call (844) 962-2046 for a diagnosis.
Yes, most furnace replacements need a permit, and in Florence-Graham it comes from LA County, not a city building department, because the area is unincorporated. That’s a step contractors working in neighboring cities don’t face.
The code points to a specific fault – airflow restriction, a failed ignitor, a pressure switch, or a board issue. We read the code against your model and diagnose the actual cause. Call (844) 962-2046.
It depends on the failure. A capacitor or ignitor is worth repairing. A compressor or heat exchanger failure on a unit that age usually points to replacement, especially if the electrical panel needs an upgrade anyway. We’ll tell you which makes sense.
Yes. Ductless mini-splits are often the practical answer for Florence-Graham bungalows with low attics and tight crawls. The condenser placement still has to clear County setback and clearance rules, which we plan before the install date.
Service Areas Near Florence-Graham
We also service Lennox systems in Burbank, Beverly Hills, San Fernando, Culver City, and View Park-Windsor Hills, plus Westmont. If you’re just outside Florence-Graham, call and we’ll confirm coverage. Our Florence-Graham service covers the full unincorporated area, and our Lennox expertise covers every model line above.
Book Your Lennox Service in Florence-Graham Today
Ready to get your Lennox system looked at? Call (844) 962-2046 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service is often available for repairs.
Written by the team at AC Repair Burbank.