AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
See the difference
Before
After
Before
After
Before
AfterHow Much Does Furnace Replacement Cost in Burbank?
A furnace replacement in Burbank typically costs between $3,500 and $7,500 installed, depending on the size of the system, the fuel type, and how much ductwork or venting the job requires. Most single-family homes land in the $4,200 to $6,000 range for a straightforward swap of a gas furnace with matching capacity. The written estimate we provide after seeing your equipment sets the final price, and that estimate is free.
Burbank homes don’t face the deep freezes of colder parts of the country, but winter nights here still drop into the 40s, and a furnace that quits in January is a real problem. Replacement pricing also depends on whether you’re staying with the same fuel and system type or changing course.
Key Takeaways
- Typical furnace replacement in Burbank runs $3,500 to $7,500 installed.
- High-efficiency condensing units cost more up front than standard models.
- Fuel type, system size, and venting needs are the biggest price drivers.
- Our technicians have up to 8 years of experience and work on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard systems.
- Estimates are free. Call (844) 962-2046. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Furnace Replacement Cost Breakdown (2026)
Below are typical estimated ranges for a furnace replacement in Burbank. These are ranges, not quotes. The written estimate you receive after we inspect your home is what sets the actual price.
| Line Item | Typical Estimated Range |
|---|---|
| Standard gas furnace, 80% AFUE, installed | $3,500 – $4,800 |
| High-efficiency gas furnace, 90%+ AFUE, installed | $4,800 – $7,500 |
| Furnace repair (for comparison) | $150 – $700 |
| Routine tune-up (for comparison) | $80 – $200 |
The gap between a repair and a replacement matters. If your furnace needs a repair in the $150 to $700 range, that’s often the smarter call, especially on a unit that’s otherwise healthy. When repair costs climb toward the cost of a new system, or when the heat exchanger is compromised, replacement starts to make sense. We’ll tell you which one actually makes sense for your situation, and we work on the system you already have rather than pushing a particular brand.
Our technicians have up to 8 years of experience diagnosing furnaces from the major brands, so if you’re weighing repair versus replacement on a Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, or American Standard unit, we can give you a straight answer.
What Affects Furnace Replacement Pricing in Burbank
No two replacements cost exactly the same. Here are the factors that move the number up or down in Burbank homes.
- Furnace size and capacity. Larger homes need higher-capacity units, which cost more and may need larger supply and return ducts. A proper load calculation prevents you from oversizing, which wastes energy and shortens equipment life.
- Efficiency rating. A standard 80% AFUE furnace costs less than a high-efficiency condensing model. High-efficiency units also need a different venting arrangement, which adds labor. In Burbank’s mild climate, the efficiency payoff depends on how much you actually run the heat each winter.
- Fuel type. Gas furnaces are the most common in Burbank. Homes on propane or electric resistance heat face different equipment and cost profiles, and switching fuel type adds work on top of a like-for-like swap.
- Venting and flue work. If the new unit vents differently than the old one, or if the existing flue doesn’t meet current requirements, venting work adds to the bill. Sealed combustion systems in particular require specific vent configurations.
- Ductwork condition. If the existing ducts are leaking, undersized, or poorly sealed, fixing them at replacement time saves a second visit. Duct corrections are quoted separately from the furnace install.
- Access and location. A furnace in a tight closet, attic, or crawlspace takes more time and care than one with clear access. Labor reflects that. Burbank’s many mid-century homes often present tighter mechanical spaces than newer construction.
Should You Repair or Replace Your Furnace?
Repair usually wins when the furnace is relatively young, the problem is a single failed component like an igniter or blower motor, and the repair falls in the $150 to $700 range. Replacement makes more sense when the heat exchanger is cracked, when repairs stack up across seasons, or when the unit is nearing the end of its service life and efficiency has dropped.
Here’s the honest framework we use: if the repair cost is a large fraction of a new system’s cost and the unit is old, replace. If it’s a modest repair on a solid system, fix it and keep going. Either way, you get the reasoning, not just a recommendation. That’s how we handle every AC Repair Burbank call, and the same standard applies to furnace replacement.
How Does the Replacement Process Work?
Replacement starts with a visit to measure and inspect. We check the current furnace’s capacity, the ductwork, the venting, and the electrical and gas connections. From there we build the estimate and walk you through options at different efficiency levels.
On install day, the old unit comes out, the new one goes in, and the connections are tested. We check that the system heats properly and that the thermostat works the way you expect. Most standard replacements are completed in a day. If ductwork corrections are part of the job, that can extend the schedule, and the estimate will say so before we start.
How to Save on Furnace Replacement in Burbank
You can’t change the price of a furnace, but you can choose a few things that keep the total down without cutting corners on the install.
- Fix duct leaks at the same time. If ducts need sealing anyway, doing it during replacement avoids paying for a second visit and keeps more of your heated air where you want it.
- Match efficiency to your actual use. Burbank’s winters are mild. A standard efficiency furnace may be the practical choice if you run the heat only part of the season, while high-efficiency makes more sense if you want to cut gas use over the long haul.
- Right-size the unit. Oversizing costs more up front and shortens equipment life. A correct load calculation is worth insisting on.
- Ask for a full breakdown. A written estimate should separate equipment, labor, venting, and any ductwork. That way you can see exactly what you’re paying for and compare fairly.
Estimates are free, and there’s no charge to talk through your situation. Call (844) 962-2046. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Choose Us for Furnace Replacement in Burbank
We’re an HVAC specialist. Heating and cooling, nothing else. That focus means every technician’s training and tooling is built around furnaces and air conditioning, not split across plumbing, electrical, or roofing. When we talk about static pressure, heat exchangers, and flue sizing, it’s the vocabulary we use every day.
We’re factory-familiar with nine leading HVAC brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That matters if your current system is one of them, because we know the equipment before we touch it. Your system, serviced by someone who knows it. And because we handle both AC installation and furnace work, you’ve got one point of contact as the system ages. If you’re weighing a replacement against a cooling upgrade, our Burbank page lays out how the two fit together.
Licensed & insured, with upfront pricing and a satisfaction guarantee. We answer 24/7 and provide fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed on Saturday.
FAQs – Furnace Replacement Cost
How much does furnace replacement cost in Burbank?
Furnace replacement in Burbank typically costs $3,500 to $7,500 installed. Standard-efficiency gas furnaces sit toward the lower end, while high-efficiency condensing units and jobs involving venting or ductwork corrections run higher. The written estimate sets the final price. Call (844) 962-2046 for an exact quote. Estimates are free.
Is it cheaper to repair or replace my furnace?
Repair is cheaper when the fix lands in the $150 to $700 range and the unit is otherwise healthy. Replacement makes more financial sense when repairs stack up or when the heat exchanger is cracked, since that’s a safety issue and the unit can’t simply be patched. We’ll tell you which one actually makes sense after we look at your equipment. Call (844) 962-2046 to schedule an assessment.
How long does a furnace replacement take?
A standard furnace replacement takes about one day. Jobs that include venting changes or ductwork corrections can run longer, and the estimate notes that before we begin. Same-day service is available when the schedule allows. Call (844) 962-2046 to book.
Can I get a free estimate on a new furnace?
Yes. Estimates are free, and there’s no charge to walk through your options at different efficiency levels. We’ll measure, inspect your ductwork and venting, and give you a written breakdown. Call (844) 962-2046 to set it up.
Does a high-efficiency furnace cost more in Burbank?
Yes, a high-efficiency furnace costs more up front than a standard 80% AFUE unit, typically running $4,800 to $7,500 installed versus $3,500 to $4,800 for standard efficiency. Whether the higher price pays off depends on how much you run the heat. Burbank’s mild winters mean the payoff is longer than in colder climates, so we’ll talk through the math with you. Call (844) 962-2046.
Pricing reflects the Burbank market as of 2026. AC Repair Burbank offers free estimates – call (844) 962-2046.
What Our Customers Say
"Got a text with the technician's name and photo before he arrived. Small thing, but as a woman home alone during the day I actually really appreciated it."
- Alma Martinez"Contactor was pitted and chattering. Cheap part, quick fix, and he showed me the burn on the old one so I could see for myself."
- Javier Morales"New system install, two days, and they were careful with the floors and the attic access the entire time. Registered the warranty for me and emailed the paperwork."
- Daniel Lawson