Heat Pump Installation Cost in Burbank - Honest Price Ranges, Free Written Quote

Real local price ranges for repair and for replacement, then a free written quote for your home. Rebates and financing options laid out with the numbers, not after you sign.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (844) 962-2046

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
AC repairAC repair
Furnace & heatingFurnace & heating
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

We have financing partners for your new heating and cooling system

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate
Explore

Styles & brands we work with

  • AC repair
  • Furnace & heating
  • Heat pumps
  • Ductless mini splits
  • Carrier
  • Trane
  • Goodman
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your HVAC?Free estimate, price agreed before work starts
Call (844) 962-2046

How Much Does Heat Pump Installation Cost in Burbank?

Heat pump installation in Burbank typically runs $3,500 to $7,500 for a complete changeout, and most homes land in the middle of that range. The low end covers a straightforward replacement that reuses the existing air handler and ductwork; the high end covers a larger-capacity system, refrigerant line replacement, or electrical upgrades needed to support the new unit. These are estimated ranges for the Burbank market as of 2026. The written estimate you get before any work starts is the final word on price, and that estimate is free.

We’re AC Repair Burbank, a heating and cooling specialist that works on both sides of the trade. Heat pump installation is one of the installations we handle, and it’s a good fit for a lot of Burbank homes because a single system covers cooling in summer and heating in the mild winter months. Call (844) 962-2046 and we’ll walk you through what a heat pump would cost for your house. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Key Takeaways

  • Typical heat pump installation in Burbank: $3,500 – $7,500 estimated, set by written estimate.
  • A heat pump both cools and heats, so it replaces two systems with one unit for many homes.
  • We work on nine major brands, including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard.
  • Our technicians have up to experience, and we specialize only in heating and cooling.
  • Free estimates, upfront pricing. Call (844) 962-2046.

Heat Pump Installation Cost Breakdown (2026)

Here’s how a typical heat pump installation in Burbank breaks down by line item. These figures are estimated ranges and skew by system size, brand, and how much of the existing setup can be reused. The written estimate sets the final price for your job.

Line Item Typical Estimated Range
Full heat pump installation (equipment + labor) $3,500 – $7,500
AC installation (cooling-only replacement, for comparison) $3,500 – $7,500
AC repair (if you decide to keep your current system) $150 – $650
Furnace repair (if a furnace changeout makes more sense) $150 – $700
Tune-up (maintenance on your existing system) $80 – $200

The single biggest driver of where you land in that range is whether you’re doing a full changeout or reusing parts. A clean swap that keeps the existing air handler, ductwork, and refrigerant lines costs less than a job that needs new lines or a bigger electrical circuit. System capacity matters too: a larger home with more square footage needs bigger equipment, and the price climbs with it. If your current system is a furnace plus a separate AC unit, replacing both with one heat pump can make the total cost of ownership competitive, because you’re maintaining one machine instead of two. If you’d rather compare options first, we’ll tell you whether a repair, an AC replacement, or a full heat pump install makes sense for what’s in your home. The brand matters less to us than the fit – we work on the system you already have, and we’ll install the brand that fits your home and budget.

Want to talk it through?Free estimate, price agreed before work starts
Call (844) 962-2046

What Affects Heat Pump Installation Pricing in Burbank

Burbank’s climate and housing stock shape the price in ways that don’t apply in colder or more humid parts of the country. Here’s what moves the number up or down.

  • Mild winters mean smaller heating loads. Burbank winters don’t demand the oversized heating equipment you see in mountain or cold-climate markets, so a heat pump sized for cooling often carries the heating load too. That can keep you near the middle of the $3,500 – $7,500 range rather than the top.
  • Summer cooling drives the sizing. In Burbank, the heat pump’s cooling capacity usually sets the equipment size, since summer comfort is the bigger concern for most households. A larger, higher-capacity unit for a big house pushes cost up.
  • Duct and air handler condition. If your existing ductwork and air handler are in good shape, a changeout is simpler and cheaper. If they need attention, that adds to the job. We’ll tell you what we find during the estimate.
  • Electrical capacity. A heat pump draws a steady electrical load, and some older panels or circuits need an upgrade to support it. When that’s the case, it’s part of the estimate. Never touch your own panel – that’s a licensed trade and a genuine safety risk, so a trained professional handles it.
  • Refrigerant line condition and run length. Long line runs or lines that need replacing add labor and materials. The location of the outdoor unit relative to the air handler matters here.
  • Whether you’re replacing a furnace-and-AC pair or one system. Swapping two pieces of equipment for one heat pump changes the math – sometimes up front, sometimes over the life of the system.

If you’re in a neighborhood like Magnolia Park, Rancho Equestrian, or the hillside areas above Glenoaks, older homes sometimes have electrical or duct setups that need more attention than a newer build would. We’ll spell that out at the estimate rather than surprise you mid-job. That’s part of how a heat pump installation in Burbank actually goes – the estimate should tell you what you’re getting into before anyone touches the equipment.

Repair or Replace? How We Help You Decide

Before you commit to a heat pump install, it’s worth asking whether your current system has life left in it. A repair on a furnace or AC unit typically runs $150 – $700, which is a fraction of a full installation. If your equipment is failing repeatedly or is near the end of its useful life, replacement starts to make more sense than repeated repairs. We’ll tell you which one actually makes sense for your situation, and we won’t push a replacement if a repair will do the job.

That’s what “fast diagnosis, honest options” means to us in practice. We work on the system you already have, whether it’s a Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, or American Standard unit. Our technicians are factory-familiar with all nine of those brands, which means less guesswork and a faster, more accurate read on whether to repair or replace. If you’re curious about the broader range of services we handle in the Burbank area, we’re glad to talk it through.

Need a price for your HVAC?Free estimate, price agreed before work starts
Call (844) 962-2046

How to Save on Heat Pump Installation

You can’t control equipment prices, but there are a few practical ways to keep your heat pump installation in Burbank closer to the low end of the range.

  • Get the estimate before you buy. The most reliable way to avoid overspending is a written, itemized estimate that separates equipment, labor, and any extras. Ours is free, and it tells you exactly what you’re paying for.
  • Reuse what’s in good condition. If your air handler, ductwork, and refrigerant lines are sound, a changeout costs less than a ground-up install. Ask specifically whether the existing setup can be kept.
  • Size the system right. An oversized heat pump costs more and runs less comfortably. Correct sizing for your square footage and Burbank’s climate keeps both the install price and your energy use in check.
  • Bundle aging equipment decisions. If your furnace and AC are both on their way out, one heat pump instead of two new systems can be the cheaper long-run path.
  • Compare repair against replace honestly. If a $150 – $650 AC repair or a $150 – $700 furnace repair keeps you going another few years, that may beat an install right now. We’ll say so if that’s the better call.

None of this requires you to know the technical side. Call (844) 962-2046 for a free estimate, and we’ll do the diagnosing. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday.

Why Choose a Specialist for Heat Pump Installation

Heating and cooling, nothing else. That’s the whole business. We don’t split our attention across plumbing, electrical, or roofing, so every technician’s training and tooling is focused on the equipment that heats and cools your home. When someone installs a heat pump, that focus matters – the job is part diagnosing, part sizing, part fitting the new equipment to the existing duct and electrical setup so it performs the way it should.

We cover the full lifecycle of HVAC equipment. That means installation of new systems and repair of existing ones, so you don’t need a separate contractor as your system ages. Our technicians have up to experience working on the major brands, from Carrier and Trane to Daikin and American Standard, and we don’t push you toward a preferred brand. We work on the system you already have, and when it’s time to install, we fit the equipment to your home rather than the other way around.

FAQs – Heat Pump Installation Cost in Burbank

How much does heat pump installation cost in Burbank?

Heat pump installation in Burbank typically costs $3,500 to $7,500 for a complete changeout. A simple swap that reuses existing ductwork and air handler lands toward the low end; larger equipment, new refrigerant lines, or electrical upgrades push it toward the top. Call (844) 962-2046 for a free, itemized estimate – the written estimate sets your final price.

Is it cheaper to repair my current AC or install a heat pump?

A repair is almost always cheaper in the short term: AC repair typically runs $150 – $650 and furnace repair runs $150 – $700, against $3,500 – $7,500 for a full install. Repair makes sense when the equipment is otherwise healthy; replacement is worth considering when it’s failing repeatedly or near the end of its life. We’ll tell you which one actually makes sense for your home – call (844) 962-2046.

Questions about your HVAC?Free estimate, price agreed before work starts
Call (844) 962-2046

Can you install a heat pump the same day?

Same-day service is possible in some cases, but a full heat pump installation usually needs more time than a repair, since equipment, sizing, and any electrical work all have to line up. Call (844) 962-2046. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening.

Do you work on the HVAC brand I already have?

Yes. We’re familiar with nine major brands: Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That means we’re not learning on the job with your equipment. If you’re replacing an existing system, we’ll talk through whether to stay with the same brand or switch. Call (844) 962-2046 for a free estimate.

Is a heat pump a good fit for a Burbank home?

Often, yes. Burbank’s mild winters and warm summers are a good match for a heat pump, which cools in summer and heats efficiently in the cooler months. Whether it’s the right call for your particular home depends on your existing ductwork, electrical capacity, and how much you want to replace at once. We’ll spell out the options – call (844) 962-2046 for a free estimate and we’ll tell you which way makes sense.

Do you offer a free estimate?

Yes, the estimate is free, and our pricing is upfront. You’ll get an itemized written estimate before any work starts, and that written estimate sets the final price. Call (844) 962-2046 to schedule. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Get Your Heat Pump Installation Estimate in Burbank

If you’re weighing a heat pump installation, the fastest way to know where you stand is a free estimate. We’ll look at your existing system and ductwork, talk through sizing, and give you an honest read on whether a heat pump install or a repair on your current equipment makes more sense. We specialize in heating and cooling only, we work on the system you already have, and we’ll tell you which option actually fits your home.

Call (844) 962-2046 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service is available in many cases.

Pricing reflects the Burbank market as of 2026. AC Repair Burbank offers free estimates – call (844) 962-2046.

Written by the team at AC Repair Burbank.

What Our Customers Say

★★★★★ 4.9 from 11+ reviews

"Got a text with the technician's name and photo before he arrived. Small thing, but as a woman home alone during the day I actually really appreciated it."

- Alma Martinez

"Contactor was pitted and chattering. Cheap part, quick fix, and he showed me the burn on the old one so I could see for myself."

- Javier Morales

"New system install, two days, and they were careful with the floors and the attic access the entire time. Registered the warranty for me and emailed the paperwork."

- Daniel Lawson
Need HVAC help in Burbank? Licensed & insured · 1-hour response · free estimates
Call (844) 962-2046

Request a Free Estimate

Tell us what's going on in Burbank. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7