AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateWhy Burbank Homeowners Choose Lennox HVAC
We provide independent Lennox HVAC service in Burbank, including repair, tune-ups and full system replacement on the brand’s Merit, Elite and Dave Lennox Signature Collection equipment. What makes our Lennox work different is that we’re not tied to any manufacturer, so we diagnose by symptom and model rather than by a sales script. We’re factory-familiar with Lennox and eight other major brands, and we work on the system you already own.

Most of Burbank’s housing went up in the 1940s through the 1960s as stucco tract homes and small bungalows, and many still run forced-air systems sized for a different era of construction. Tight attics and air-handler closets add to the challenge. Lennox equipment handles that load well when it’s healthy, and it tells you clearly when it isn’t. If you need Lennox service you can reach us at (844) 962-2046. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
One thing to be clear about up front: AC Repair Burbank is an independent Lennox service provider. We are not affiliated with, authorized by or acting on behalf of Lennox.
Why Trust AC Repair Burbank for Your Lennox HVAC?
Trust in HVAC comes down to whether the person at your door knows the equipment in front of them. Our technicians have up to experience working on Lennox systems, and they’ve seen what the brand’s condensers, furnaces, heat pumps and mini-splits do after several summers of 100°F-plus Burbank heat.
That familiarity shows in small ways. On a Lennox Merit or Elite condenser, a fan that won’t start is often a failed dual-run capacitor or a pitted contactor, not a refrigerant problem. A technician who doesn’t know Lennox equipment might chase the wrong diagnosis. Ours start with the electrical side because that’s where these units usually fail first.
We use quality parts that fit Lennox equipment. Where the model or the warranty condition calls for it, that means OEM components; for standard repairs like capacitors, ignitors and contactors, proven aftermarket parts do the job well. Either way, the choice is explained to you before we make it.
Warranty-safe practice matters too. A repair done wrong can affect your manufacturer coverage, and we take care that routine service and parts replacement keep your Lennox warranty intact. Every repair is tested before we leave, and our written estimate sets the final price. The estimate itself is free.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Common Lennox HVAC Problems We Fix in Burbank
Lennox equipment has a few recurring trouble spots, and in Burbank’s climate they show up in predictable ways. Here are the ones we see most.
- Failed run capacitors and hard-start components. Merit and Elite condenser fan and compressor circuits are the usual suspects. After a summer of long run cycles in San Fernando Valley heat, a weak capacitor stops the fan or keeps the compressor from kicking on. The system runs but doesn’t cool. A technician meters the capacitor and contactor first, because that’s the cheapest and most common fix.
- Clogged condensate traps and drain lines. High-efficiency Lennox gas furnaces like the ML193 and EL296V pull moisture out of the flue gas, and that water has to go somewhere. A blocked trap or drain line backs pressure up to the switch and locks the furnace out. In Burbank’s mild winters these furnaces often sit idle for months, which lets debris settle in the trap.
- Cracked heat exchangers and failed inducers on older units. On aging Lennox gas furnaces, a cracked heat exchanger is a safety issue, not just a performance one. It’s often found during a tune-up rather than at a breakdown, which is one reason a $80 – $200 seasonal check is worth the money. A failed inducer motor will stop the furnace from firing at all. We recommend a trained professional inspect any heat exchanger concern; that’s not a job for a homeowner with a flashlight.
- Zone-control board and communicating thermostat faults. Dave Lennox Signature Collection multi-zone systems and mini-splits rely on communication between the controller and each zone. When a board or thermostat loses that link, one zone goes silent or the whole system throws a fault code. These take a technician familiar with the control architecture to sort out correctly.
- Dirty flame sensors and short-cycling. A flame sensor coated with carbon will drop the burner signal a few seconds after ignition, and the furnace cycles off and tries again. On Lennox high-efficiency models this often pairs with a pressure-switch fault, so the two get checked together.
A common Lennox call is an Elite or Merit condenser that runs but blows warm, traced to a weak dual-run capacitor or a failed contactor rather than low refrigerant. On the heating side, a high-efficiency Lennox furnace that short-cycles or locks out often has a blocked condensate trap or a dirty flame sensor. A qualified local tech typically meters the capacitor and contactor, checks pressures and delta-T, then clears or replaces the trap and confirms pressure-switch operation before reassembling.
Lennox Parts & Our Repair-vs-Replace Approach
Parts selection on a Lennox system is a judgment call, and we make it in plain language. Where the model or the warranty condition calls for OEM components, that’s what we use. For standard repairs, proven aftermarket capacitors, ignitors and contactors are fine and often more available. We don’t stock OEM or genuine Lennox parts, and we’re not a Lennox dealer. We repair, install and service Lennox equipment with quality parts that fit it.
Repair usually makes sense on most Lennox units under about 12 to 15 years old. Replace when the heat exchanger is compromised, or when the repair cost approaches half the price of a new install. Those are the two thresholds we use, and we’ll tell you which one you’re closer to. A Lennox system that’s been maintained in Burbank’s heat may well have years left; one that’s been limping along without service usually doesn’t.
Call (844) 962-2046 for a free estimate and an honest read on repair versus replacement.
Our Lennox Service Process – Step by Step
Every Lennox job follows the same sequence, whether it’s a quick capacitor swap or a full furnace replacement.
- 1
Diagnosis. We start with the symptom and the model. A Lennox Elite condenser that won’t start gets its capacitor and contactor metered before anything else, because that’s the most likely failure. A high-efficiency furnace that locks out gets its condensate trap and pressure switch checked first. We confirm the cause before quoting a fix.
- 2
Repair or install. For a repair, we use quality parts that fit your Lennox model and explain the OEM-versus-aftermarket choice. For a replacement, we match the new system to your home’s actual load and ductwork, which matters in a Burbank bungalow with a tight attic and an undersized return.
- 3
Test and verify. After any repair, we check pressures and delta-T, confirm the system cycles normally, and run it through a full cycle before we call it done. On heating, we verify pressure-switch operation and burner performance.
- 4
Warranty and paperwork. We document what was done and which parts went in, so your Lennox warranty record stays clean. If a part is covered, we’ll tell you what to file and how.
See the difference
Before
After
Before
After
Before
AfterLennox Products We Service & Install in Burbank
We repair, service and install the full range of Lennox residential equipment. That includes central air conditioners across the Merit and Elite lines, like the ML14XC1 and EL16XC1, and the variable-capacity EL18XPV. Heat pumps are on the list too, including the ML16XP1 and the inverter-driven SL22KLV and SL28XCV from the Dave Lennox Signature Collection. On the heating side we handle Lennox gas furnaces, including the ML193 and EL296V high-efficiency models, along with Signature Collection mini-split and multi-zone systems. Whether your Lennox system needs a repair, a seasonal tune-up or a full replacement, it’s the same crew and the same process.

We Also Service These Brands
Lennox is one brand among nine we’re factory-familiar with. We also work on Carrier and Trane equipment, along with Goodman, Rheem, York, Daikin, Bryant and American Standard. That matters if you’re comparing systems or if a second unit in the house is a different make. We work on the system you already have, whatever name is on the badge. Heating and cooling, nothing else.
FAQs – Lennox HVAC Service in Burbank
No. We are an independent Lennox service provider, not an authorized dealer or affiliated with Lennox in any way. We diagnose and repair Lennox equipment without any manufacturer tie, which means our recommendations are based on what your system actually needs.
Yes. We use OEM Lennox components where the model or the warranty condition calls for them, and proven aftermarket capacitors, ignitors and contactors for standard repairs. We don’t stock genuine Lennox parts, but we source what fits your specific model and explain the choice before the work starts. Call (844) 962-2046 for a free estimate.
Most Lennox repairs take one to two hours once we’ve diagnosed the problem. A capacitor or contactor swap on a Merit or Elite condenser is usually under an hour. A full system replacement is scheduled, not same-day, because it’s load-calculated and the equipment has to be ordered. Call (844) 962-2046 and we’ll give you a realistic timeline.
We service and install Lennox air conditioners, gas furnaces, heat pumps and Signature Collection mini-split and multi-zone systems, including the Merit, Elite and Dave Lennox Signature Collection lines. If it’s Lennox residential heating or cooling equipment, we work on it.
Not when it’s done correctly. We use parts that fit your Lennox model and document what was replaced, so the manufacturer’s warranty record stays intact. Improper work or the wrong parts can affect coverage, which is one reason we’re careful about OEM components where the warranty calls for them. Call (844) 962-2046 with your model number and we’ll walk you through it.
Typical estimated ranges for Burbank are shown below. These are estimates only, and the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| AC Repair | $150 – $650 |
| Furnace Repair | $150 – $700 |
| AC Installation | $3500 – $7500 |
| Tune-Up | $80 – $200 |
Call (844) 962-2046 for an exact quote. Estimates are free.
Repeated fan motor failure usually traces back to a failing run capacitor or a weak contactor feeding the motor a poor voltage signal, not a bad motor. In Burbank, where summers regularly exceed 100°F, the long run cycles wear those electrical parts faster. A technician should meter the capacitor and contactor before replacing the motor again. Call (844) 962-2046 for a free estimate.
A blocked or clogged condensate trap or drain line is the most common cause on these high-efficiency Lennox furnaces, followed by a failing inducer or a dirty pressure switch port. In Burbank’s mild winters the furnace sits idle for months, letting debris settle in the trap. Clearing the trap and confirming pressure-switch operation usually resolves it. Call (844) 962-2046 for service.
Usually not. A cracked heat exchanger is a safety concern, and replacing it often costs close to half a new install. On a Lennox furnace at that point, replacement is the more sensible call. We inspect for it during tune-ups and will tell you plainly if we find one. Call (844) 962-2046 for a free estimate.
Once a year. Burbank’s heat pumps run long cooling seasons with mild winters, so a spring tune-up keeps the refrigerant charge and electrical components healthy before the heat arrives. A tune-up runs $80 – $200 and often catches a weak capacitor before it strands you. Call (844) 962-2046 to schedule.
Not always. OEM parts are the right call where the model or the warranty condition requires them, but proven aftermarket capacitors, contactors and ignitors work fine for standard repairs. We explain which parts your specific Lennox needs and why. Call (844) 962-2046 for a free estimate.
Book Your Lennox Service in Burbank, CA
Whether your Lennox system needs a repair, a tune-up or a full replacement, we’ll give you a fast diagnosis and honest options. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written estimate sets the final price. Call (844) 962-2046 today.
Written by the team at AC Repair Burbank.